- 38 -
Intended Usage
This Micro system is intended exclusively for the playback of
audio CDs, MP3/WMA CDs, CD-R, CD-RW, USB storage
mediums, audio cassettes and for the playback of radio pro-
grammes. Additionally, the Micro system is suitable for the re-
cording of audio cassettes. The Micro system is not intended
for use in commercial or industrial environments. No liability/
warranty will be accepted for damage resulting from improper
use of the device or from unauthorised modification!
Contents
1 Micro system
2 Speakers
2 Speaker cables
1 Remote control (incl. 3 V battery, CR-2032)
1 Operating manual
Technical Data
Rated voltage:
230 V~, 50 Hz
Power consumption:
In standby
1.55 Watt
in operation
max. 26.5 Watt
Music output:
2 x 2 Watt RMS
Radio frequency range: MW (AM): 526.5 -1606.5 kHz
VHF (FM): 87.5 -108 MHz
The technical details of the device allow for an adjustable
frequency range outside of the receivable MW (AM) 526.5-
1606.5 kHz, and/or FM (USW) 87.5 - 108 MHz frequency
ranges. In some countries, different national regulations may
apply to the assigned radio frequency ranges. Please note
that information received outside of the assigned radio fre-
quency ranges may not be exploited, passed on to third par-
ties or otherwise misused.
USB port
Readable storage mediums: USB1.1 and 2.0 up to
a capacity of 32GB
CD player:
Laser class 1
Playback formats:
CD, CD-R, CD-RW, MP3/WMA
CDs
Cassette:
Standard
cassette
(C-90 or shorter)
Tape speed:
4.75 cm/sec.
Headphones output:
3.5mm Jackplug
Maximum
output voltage:
137 mV
Remote Control
Battery:
1 x 3 V Type CR 2032
Measurements (W x H x D):
Main device:
15.4 x 22.2 x 20.4 cm
Per speaker:
13.7 x 21.9 x 12.5 cm
Weight
Main device:
approx. 2 kg
Per speaker:
690 g approx.
Operating temperature:
5° - 40°C
Storage temperature :
-20° - 60°C
Protection class:
II /
Subject to technical changes.
Safety instructions
These operating instructions are the basis for any handling
•
of the device and must be kept in the immediate vicinity of
the device.
This device is not intended for use by individuals (including
•
children) with restricted physical, physiological or intellec-
tual abilities or deficiencies in experience and/or knowl-
edge unless they are supervised by a person responsible
for their safety or receive from this person instruction on
how the device is to be used. Children must be supervised
to ensure that they do not play with the device.
Check the device and all parts for visible damages. The
•
safety concept can work only if the device is in a faultless
condition.
Risk of explosion!
Do not throw batteries into a fire.
•
Do not recharge the batteries.
•
Never open batteries, never solder or weld batteries.
•
The risk of explosions and injuries exists!
Regularly check the condition of the batteries.
•
Leaking batteries can cause damage to the remote control
or to the device.
If you do not intend to use the device for an extended
•
period of time, remove the batteries.
If batteries have leaked put on protective gloves and clean
•
the battery compartment with a dry cloth.
Risk of electrical shocks.
Connect the device to an electrical wall socket with a mains
•
voltage of 230 V ~ /50 Hz.
Do not operate the device if the connection cord or the
•
power plug is damaged.
The connection cord or device should be immediately re-
•
paired or exchanged by the customer service department
if they fail to function faultlessly.
Never submerse the device in water. Wipe it only with
•
a slightly damp cloth.
Do not expose the device to rain and never use it in a humid
•
or wet environment.
Make sure that the power cord does not become wet dur-
•
ing operation.
You must not open the device housing or attempt to repair
•
the device yourself. There is invisible radiation inside the
device (Class 1 Laser) Furthermore should you do so, the
safety concept of the device may be compromised and the
warranty becomes void.
Do not place objects containing fluids, e.g. flower vases,
•
on or near the device.
