- 43 -
Programme playing order
You can programme an order in which the titles of a CD
are to be played. 32 programme slots are available for this
purpose. Programming is only possible when playback is
stopped.
Press the button
>
PROG/CLOCK-ADJ.
on the device.
In the display appears the notice "PROG" and the pro-
gramme slot 1 (
P - 0 1
) of the title which is to be played first
with the programmed playback.
Select with the buttons
>
SKIP/SEARCH
and/or
SKIP/SEARCH
the desired title for the indicated pro-
gramme slot. In place of the programme position indicator
the display now shows the CD titles available for selection.
To save the selected title press the button
>
PROG/CLOCK-ADJ.
on the device.
To programme further titles, repeat the previously described
>
steps. When all programme slots are occupied
FUL
will be
shown in the display.
Starting the programmed title list.
When you have programmed all desired titles you start
>
playback by pressing the button
/
PLAY/PAUSE/
BAND
on the device and/or on the remote control.
If you press the button
>
STOP/FM MO/ST.
on the device
and/or
STOP/FM MONO/ST.
on the remote control
you will end playback, however, the device remains in
programme mode.
If you press the button
>
STOP/FM MO/ST.
on the device
and/or
STOP/FM MONO/ST.
on the remote control
twice you delete the programme and the device exits the
programme mode.
The programmed title sequence is deleted when you open
the CD compartment, switch to another mode of operation or
switch off the Micro system. The notice "PROG" is erased in
the display.
MP3/WMA functions
"MP3" denotes a process and/or format developed by the
Fraunhofer Institute for the compression of audio data. In the
MP3 format compressed music pieces are only a fraction of
their original size, which, for example, on CD-Rs/CD-RWs
allows for storage of a considerably greater volume of music
than on commercially available audio CDs, on which audio
data is stored in the CDA format. Indeed the audio quality is
scarcely reduced by the process.
"WMA" is a process and/or format developed by Microsoft
®
for the compression of audio data. The compression process
is largely comparable to the MP3 process.
MP3/WMA title playback
Place a CD with MP3/WMA files into the CD compart-
>
ment. The device will now read the CD. In the display ap-
pears the notice "MP3" and/or "WMA" and, alternating,
the number of the available folder and the number of the
disc title.
Playback of the CD starts automatically and in the display
appears the playback symbol
. Alternating with the title
number the display shows the number of the folder from
which is currently being played (i.e.
F01
as the 1st. folder in
alphabetical order).
If the MP3/WMA CD contains several folders proceed as
follows:
To select a folder before the start of playback press,
>
repeatedly, the button
FOLDER
or
FOLDER
on the
remote control.
Press the button
>
/
PLAY/PAUSE/BAND
on the de-
vice and/or on the remote control to start playback with
the files in this folder. After the files from this folder have
played back the device switches to the next alphabetical
folder.
To select another folder during playback press repeatedly
>
the button
FOLDER
or
FOLDER
on the remote control.
Playback stop/resume
During playback press the
>
/
PLAY/PAUSE/BAND
button on the device and/or on the remote control to stop
playback. With stopped CD playback the number of the
currently playing title and the pause symbol
blink in the
display.
To resume playback press the
>
/
PLAY/PAUSE/BAND
button once more.
Stopping playback
Press the button
>
STOP/FM MO/ST.
on the device or the
button
STOP/FM MONO/ST.
on the remote control.
Next/previous title
To playback the next MP3/WMA title on the CD press
>
the button
SKIP/SEARCH
on the device and/or on the
remote control.
To playback the previous MP3/WMA title from a CD
>
press twice briefly in succession the
SKIP/SEARCH
but-
ton on the device and/or on the remote control.
Search forward and backward
You can activate a search to look for specific passages within
an MP3/WMA title.
For this, during playback, hold down the button
>
SKIP/SEARCH
(Search forward) and/or the button
SKIP/SEARCH
(Search backwards) until the desired
location in the title is reached.
Programming an MP3/WMA title sequence
You can programme the sequence in which the titles of an
MP3/WMA CD are to be played back. 99 programme slots
are available for this purpose. This is only possible when the
play function has been stopped
Press the button
>
PROG/CLOCK-ADJ.
on the device.
In the display appears the notice "PROG" and the pro-
gramme slot 1 (
P - 0 1
) of the title which is to be played first
with the programmed playback.
Select with the buttons
>
SKIP/SEARCH
and/or
SKIP/SEARCH
the desired folder for the indicated pro-
gramme slot.
