■
12
│
GB
│
IE
SBKG 40 A1
Handling and operation
Switching the headphones on/off
♦
Press the
button
4
for about 2 seconds to switch on the head-
phones. You will hear a beep and the LED
6
lights up blue for
approx. 2 seconds. Afterwards, the LED
6
flashes blue and white. The
headphones are now in pairing mode.
♦
To switch off the headphones, press the
button
4
again for about
2 seconds until you hear a beep and the LED
6
goes out.
Wearing the headphones
♦
When putting the headphones on, please note the markings “
R
” (right)
and “
L
” (left) on the inside of the adjustable headband
1
.
♦
Adjust the headband
1
so that it fits your head comfortably and the
earpieces
2
cover your ears.
Pairing/unpairing the headphones with a
Bluetooth
®
device
Before you can use the headphones with the
Bluetooth
®
function, you must
pair them with a compatible
Bluetooth
®
device.
♦
Switch on the headphones as described above to activate pairing mode.
♦
Set the
Bluetooth
®
playback device so that it scans for
Bluetooth
®
devices. A detailed description of how to do this can be found in the
operating manual for your
Bluetooth
®
playback device.
♦
Select the entry
SBKG 40 A1
from the list of devices found on your
Bluetooth
®
playback device and, if required, enter the code
0000
to connect the two devices. If the pairing is successful, you will hear a
series of beeps and the LED
6
will flash blue every 5 seconds.
Summary of Contents for SBKG 40 A1
Page 3: ......
