38 GB/IE
• If you wish to turn the sound off, press the
MUTE
button on the remote control. Press
the
MUTE
button again or press the
VOL+
/ VOL-
buttons on the unit or on the remote
control to resume normal listening.
• While adjusting the volume, the status indicator
flashes quickly.
• When the volume level reaches its maximum
level, if you press the
VOL+
button again, the
status indicator flashes once. When the volume
level reaches its minimum level, if you press the
VOL
- button again, the status indicator flashes
once.
Select a preset sound effect
While playing, press the
EQ
button on the unit or
the
NEWS / MOVIE / MUSIC
buttons on the
remote control to select from one of the following
preset equalisers:
•
MOVIE
(recommended for viewing movies
•
Music
(recommended for listening to music
•
NEWS
(recommended for listening to NEWS)
AUX / OPTICAL / HDMI ARC
Operation
1.
Ensure that the unit is connected to the TV or
audio device.
2.
Press the
AUX / OPTICAL / HDMI ARC
button on the remote control to select the
desired mode.
3.
Operate your audio device directly for
playback features.
4. Press the
VOL +/VOL–
buttons to adjust the
volume to your desired level.
Note:
While in
OPTICAL/HDMI ARC
mode, if there’s
no sound output and the status indicator flashes
from the unit, you may need to activate
PCM
Signal output on your source device (e.g. TV, DVD
or Blu-ray player).
Operation
Standby/ON
When you first connect the unit to the mains socket,
it will be in standby mode. The POWER indicator
will light up red.
Press the button on the unit or the remote control
to switch the main unit ON or OFF.
Disconnect the mains plug from the mains socket if
you want to switch the unit off completely.
Note:
• If a TV or an external device (Only for
AUX
socket) is connected, the unit will switch on
automatically when the TV or the external
device is switched on.
• When turning the system on, the system will
continue in the mode it was in when it was last
turned off.
• If the unit is idle for over 15 minutes, the unit
will automatically switch to Standby mode.
Select modes
Press the
AUX
,
OPTICAL
,
HDM
I
ARC
and
BT
(Bluetooth) buttons on the remote control to select
the desired mode.
• In
AUX
mode: the status indicator lights up
Green.
• In
USB
mode: the status indicator will flash
White.
• In
Optical
mode: the status indicator lights up
Orange.
• In
Bluetooth
mode: the status indicator lights
up Blue.
• In
HDMI ARC
mode: the status indicator
lights up White.
Adjust the volume
• Press the
VOL+ / VOL-
buttons on the unit or
on the remote control to adjust the volume.
