SDB 2400 F4
GB
│
MT
│
39
■
Housing and sole of the iron
RISK OF ELECTROCUTION!
►
Remove the plug before cleaning the device . There is a risk of electric shock!
RISK OF INJURY!
►
Allow the appliance to cool down before cleaning it . Otherwise, there is
risk of burns!
CAUTION – PROPERTY DAMAGE!
►
Do not use abrasive, aggressive or chemical cleaning agents . They can
damage the surface and also lead to irreparable damage to the appliance .
■
Clean the housing with a soft, dry cloth only .
■
Clean the sole of the iron
q
using a damp cloth and a mild, nonscouring
detergent .
Storage
■
Store the cooleddown appliance in a clean, dustfree and dry location .
Troubleshooting
Problem
Cause
Solution
The steam iron blasts
out no steam/very
little steam
The reserves of tap
water in the steam
iron are depleted .
Fill the water tank with tap
water (See
Filling the
water tank
) .
The steam iron does
not get hot .
The steam iron is
not plugged in or
is not switched on .
Insert the plug into a wall
power socket and adjust the
temperature control
8
to the
desired ironing temperature .
The steam iron is
defective .
Arrange for the steam iron
to be repaired by qualified
specialists .
Summary of Contents for SDB 2400 F4
Page 3: ...A B ...