8
GB
6. Before using for the
first time
1. Ensure that you have pulled out the
mains plug.
2. The switch
11
is in the top position
. Remove the steam iron from the
stand
12
. The cable base
10
remains
in the stand.
3. Peel the protective foil off the
sole plate 18.
4. Open the lid
2
(of the water tank).
5. Half-fill the water tank
16
.
6. Place the steam iron in the stand
12
.
7. Insert the mains plug into a wall socket
corresponding to the technical data.
8. Set the temperature controller
19
to
MAX.
The temperature control lamp
14
lights
up.
9. When the device has reached the de-
sired temperature (temperature control
lamp
14
goes out), iron an old cotton
towel in steam mode until the water tank
16
is empty.
7. Operation
DANGER!
~
The sole plate
18
becomes very hot dur-
ing operation. Only touch the handle
6
and control elements of the steam iron
during operation.
~
Even during short interruptions, always
place the steam iron in the stand
12
and never on its sole plate
18
. There is
a fire hazard!
NOTE:
• You may notice an odour when using
for the first time. This is a result of the
manufacturing process and is not a de-
fect with the device. Ensure adequate
ventilation.
The sole plate
18
cools down slightly during
ironing. In order to reach the set temperature
again, the device heats the sole plate
18
up
again, during which the temperature control
lamp
14
lights up. The temperature control
lamp
14
goes out again when the set tem-
perature is reached. This process repeats it-
self during ironing.
Ironing with cable:
simply continue iron-
ing during the heating phase.
Cable-free ironing:
the steam iron stands
on the stand
12
.
Wait until the temperature control lamp
14
goes out.
BB&3(B%ERRN6HLWH0LWWZRFK-XOL
Summary of Contents for SDBK 2400 D3
