10 GB
7.4 Ironing without steam
Sensitive fabrics are ironed at lower temper-
atures and without steam. In order to damp-
en them, the spray function is available.
1. Set the steam flow rate control
5
to
and set the temperature controller
19
to
MIN.
2. Fill the water tank
16
if you wish to use
the spray function.
3. Place the steam iron in the stand
12
.
4. Connect the mains plug with the wall
socket.
5. Set the desired temperature using the
temperature controller
19
. The tempera-
ture control lamp
14
lights up.
6. Start ironing as soon as the ironing tem-
perature has been reached
14
and the
temperature control lamp goes out.
7. Finish ironing, set the temperature con-
troller
19
to
MIN
and pull out the
mains plug.
8. Allow the steam iron to cool down, and
pour off any remaining water from the
water tank
16
through the filling open-
ing in the water tank (under the lid
2
).
7.5 Ironing with steam
Steam ironing requires a high temperature,
at least the temperature setting for
. In or-
der to additionally dampen items of cloth-
ing, the spray function is also available.
1. Set the steam flow rate control
5
to
and set the temperature controller
19
to
MIN.
2. Fill the water tank
16
.
3. Place the steam iron in the stand
12
.
4. Connect the mains plug with the wall
socket
5. Set the temperature controller
19
to the
desired temperature (at least
). The
temperature control lamp
14
lights up.
6. As soon as the ironing temperature has
been reached and the temperature con-
trol lamp
14
goes out, adjust the steam
flow rate controller
5
to the desired
steam flow rate
and start
ironing.
The steam will...
… start to come out as soon as you hold
the steam iron horizontal, and
… stop as soon as:
- you hold the steam iron vertical,
- you place the steam iron in the
stand
12
,
- the temperature falls too low,
- the water tank is empty,
or
- you set the steam flow rate controller
5
to
.
7. Finish ironing, set the temperature con-
troller
19
to
MIN,
set the steam flow
rate controller
5
to
and pull out the
mains plug.
8. Allow the steam iron to cool down, and
pour off any remaining water from the
water tank
16
through the filling open-
ing in the water tank (under the lid
2
).
7.6 Steam burst function
The steam burst function requires a high tem-
perature. Select a temperature setting be-
tween
and
MAX.
For this purpose, the
water tank
16
must be at least one quarter
full.
• Press the steam burst button
4
while
the steam iron glides over the item of
laundry.
• Wait a few seconds before you press
the steam burst button
4
again.
NOTE:
• For smoothing items of clothing that are
hanging up, you can use the steam
burst in a vertical position.
BB&3(B%ERRN6HLWH0LWWZRFK-XOL
Summary of Contents for SDBK 2400 D3
