SDI 2800 D4
GB
│
IE
│
NI
│
CY
│
9
■
Setting up
The appliance requires unrestricted ventilation to prevent overheating. Therefore,
set up the appliance so that ...
–
there is an all-round clearance of at least 10 cm, e.g. to the nearest wall,
–
at least 60 cm clearance above, e.g. to a suspended wall cabinet.
■
For cooling purposes, the appliance draws in air through openings on the
base. Do not place it on textiles or fleecy surfaces, such as tablecloths.
Operate it only on smooth surfaces.
■
Do not place it adjacent to curtains or other textiles that could be drawn
against or onto the appliance due to the airflow.
■
Do not place it on surfaces that may contain ferric or steel materials. They
may become very hot.
■
Maintain a minimum distance of 1 m from appliances that are sensitive to
electromagnetic fields (e.g. screens, clocks, magnetic storage media, elec-
tronic appliances, etc.).
■
Wipe the induction fields
1
/
3
with a damp cloth to remove soiling sustained
during transportation.
Electrical connection
When you have unpacked and set up the appliance as described, connect the
plug to a mains power socket.
■
Before you connect the appliance, ensure that the connection data (voltage
and frequency) specified on the type plate matches that specified on your
mains power supply.
■
The mains power socket must be protected by a 16 A circuit breaker.
■
Do not use an extension cable to connect the appliance. In the event of an
emergency, the plug must be quickly accessible.
■
Do not route the power cable over the appliance or over hot and/or sharp-
edged surfaces.
■
Ensure that the power cable cannot become trapped.
IB_374031_SDI2800D4_IE_NI_CY.indb 9
22.09.2021 14:08:14
Summary of Contents for SDI 2800 D4
Page 3: ...B max max 1800W 1000W A ...
