15
GB
Cleaning, storage
Tip:
Clean the epilator head
3
carefully after each use to keep your
epilator working effectively.
j
Slide the On / Off switch
6
downwards into position “0”.
j
Press the head release button
5
on the side and pull off the epilator
head
3
with your other hand.
j
Press the small unlocking lever
11
on the underside of the epilator
head
3
to the side and take the epilator roller system
4
out of
the epilator head frame
2
(see Fig. B).
j
Using the supplied cleaning brush remove the hairs from between
metal tweezers and the plastic parts.
j
Turn the epilator rollers to remove any hairs trapped in the epilator pairs.
j
Insert the epilator roller system
4
back into the frame: Make sure that
the double guides
9
and the gearwheel
10
are on opposite sides.
j
Listen for the epilator roller system
4
to engage with an audible click.
j
Make sure that the gearwheels
10
on the underside of the epila-
tor roller system
4
and on the epilator are positioned one above
the other.
j
Replace the epilator head
3
on to the epilator. Listen for the audible
click.
j
Replace the protective cap
1
.
Q
Cleaning the housing and
the plug-in mains adapter
m
CAUTION!
Do not use scouring agents. They may scratch the
surface.
j
Use a soft, slightly moist cloth or sponge only to wipe the epilator
housing and the plug-in mains adapter.
