GB/IE/NI
6
1. Introduction
We congratulate you on your new device purchase.
You have thus opted for a high quality product.
These Directions for Use are an integral part of this
product. They contain important information for
safety, use and disposal. Prior to the product use,
make yourself familiar with all instructions for use
and safety. Use the product only as described and
only for the specified fields of use. If you hand on
the product to third parties, also hand over all the
product documents.
1.1 Intended Use
This device is only intended for heating of closed
and dry rooms during transitional periods. It can be
used as supplementary heating or as a temporary
heating option for well insulated spaces with a size
of up to approximately 18 m². The device is not
intended for use in special conditions, for example,
in a corrosive or explosive area (dust, vapour or
gas). Do not use the device outdoors. Any other use
or modification of the device is deemed to be an
improper use and means a considerable risk of acci-
dents. For damage caused by the improper use, no
liability will be accepted by us. This device is meant
only for private use and not for commercial use.
FAN HEATER SHL 2000 A1
1.2 Scope of Delivery
1 Fan heater SHL 2000 A1
1 Instruction manual
1.3 Equipment
1 Tilt protection
2 Heating level switch
3 Control light
4 Temperature regulator (thermostat)
1.4 Technical Data
Input voltage:
220-240 V~
Mains frequency:
50-60 Hz
Rated power:
1800-2000 W
Power consumption
Heating level 1:
1000 W
Heating level 2:
2000 W
Fan operation:
15 W
Type of protection:
IPX0
Protection class:
Power cable length:
1,8 m
