Silvercrest SILVERCREST KH 2156, Operation Manual

- 14 -

Adjust contrast

You can set the display's contrast as follows:
1.

Hold down the S button 

r

 for a little longer than 3 sec-

onds. The notice "CODE SETUP" appears.

2.

With the 



 or 



 button 

t

 select "SYSTEM SETUP" and 

confirm with the OK button 

k

.

3.

With the 



 or 



 button 

t

 select "CONTRAST SETUP" 

and confirm with the OK button 

k

.

4.

In the LCD display 

q

 the contrast value now blinks which 

you can set with the 



 or 



 button 

t

. 

Display readout: 

  0 = highest contrast: 

15 = lowest contrast

5.

With the OK button 

k

 you can save the desired setting. 

The notice "CONTRAST SETUP" appears again.

Background Illumination

You can set the length of time that the background of the 

LCD display 

q

 stays illuminated after the end of operation. 

Thereby taking into account that the longer the illumination 

remains lit the shorter the battery life will be.
1.

Hold down the S button 

r

 for a little longer than 3 sec-

onds. The notice "CODE SETUP" appears.

2.

With the 



 or 



 button 

t

 select "SYSTEM SETUP" and 

confirm with the OK button 

k

.

3.

With the 



 or 



 button 

t

 select "BACKLIT SETUP" and 

confirm with the OK button 

k

.

4.

In the LCD display 

q

 now blinks the second count for the 

length of time that the light is to be left on which you can 

set with the 





 buttons 

t

 from 0 to 60. If you select 

"0" the background illumination will shut off completely. 

5.

With the OK button 

k

 you can save the desired setting. 

The notice "BACKLIT SETUP" appears again. 

System reset

Via this function you can reset the URC to its factory default 

settings. Thereby all settings made by you will be deleted.
1.

Hold down the S button 

r

 for a little longer than 3 sec-

onds. The notice "CODE SETUP" appears.

2.

With the 



 or 



 button 

t

 select "SYSTEM SETUP" and 

confirm with the OK button 

k

.

3.

With the 



 or 



 button 

t

 select "SYSTEM RESET" and 

confirm with the OK button 

k

.

4.

In the LCD display 

q

 now appears "CONFIRM RESET" 

confirm the reset with the OK button 

k

. All settings are 

now deleted and the menu will end.