22 GB
7. Operation
DANGER! Risk of injury
through scalding!
~
It is always necessary to close the lid
|
1
when brewing coffee
,
as boiling water
may otherwise spray out!
~
During the brewing process, hot steam
escapes upwards through the lid
|
1.
The
lid becomes hot. Do not touch it or put
your hands or other body parts in the
steam under any circumstances.
~
Do not open the lid
|
1
during the brewing
process.
~
Fill the coffee machine
|
6
only to the
maximum filling level
(10)
, as hot water
may otherwise spray out.
~
Do not bend over the coffee machine
|
6
when you open the lid
|
1
and the con-
tents are still hot. There is a danger of
being scalded by escaping steam.
WARNING! Risk of material dam-
age!
~
Fill in water at least up to the
2
marking
on the water level indicator
|
5.
Other-
wise the device may overheat.
~
Do not fill in water above the
10
mark-
ing on the water level indicator
|
5.
If too
much water is put into the water tank
|
4,
it will run out again through the over-
flow
|
3
and under the base of the coffee
machine.
~
Never put fluids other than fresh drink-
ing water into the coffee machine
|
6.
7.1 Drip Stop
The filter holder
|
11
has an anti-drip
valve
|
10.
This ensures that no coffee drips
out of the filter, when you remove the ther-
mal jug
|
8.
• In order to ensure that the valve opens
during the brewing process, it is impor-
tant that the filter holder
|
11
is inserted
correctly and the thermal jug
|
8
with
lid
|
9
is positioned completely in the cof-
fee machine.
The lid
|
9 on the ther-
mal jug
|
8 opens the anti-drip
valve
|
10. Otherwise the filter
can overflow.
7.2 Opening and closing the
lid
In order that the appliance can work correct-
ly, it is important for the thermal jug
|
8
to be
placed in the coffee machine
|
6
and that the
lid
|
9
is closed.
•
Figure B:
lid
|
9
opened, coffee
can be poured out.
•
Figure C:
lid
|
9
closed, the thermal
jug
|
8
can be placed in the coffee ma-
chine
|
6
or coffee is kept hot.
7.3 Brewing coffee
1. Lift up the lid
|
1
of the coffee machine
|
6.
2. Only fill fresh, cold tap water into the
water tank
|
4.
Hot or carbonated water
can result in malfunctions.
Fill the water tank
|
4
up to desired mark-
ing with water (for not more than 10
cups:
10)
.
3. Hold the filter holder
|
11
by its han-
dle
|
12
and lower it into the holder of
the coffee machine. Turn the filter hold-
er
|
11
in such a way that it can be low-
ered completely into the holder. Fold the
handle
|
12
of the filter holder
|
11
to-
wards the front.
Summary of Contents for SKMD 1000 A1 KAT
