13
GB
NOTE:
above all, the ideal speed depends
on the consistency of the material being
blended. The more liquid the contents, the
faster you can blend them.
9.3 Pulse function
NOTE:
the pulse function only works if the
speed control
|
11
is set to at least
1
.
• By pressing the
PULSE
|
12
button, you
can briefly increase the speed to the
highest setting (
10
).
• Use the pulse function to shred small
quantities of e.g. nuts, herbs or onions
in the blender jug
|
5
.
9.4 Overheating protection
The device has an overheating protection
system. If the motor becomes too hot, the de-
vice automatically switches itself off:
1. Switch off the device.
2. Pull out the mains plug
|
13
.
3. Allow the device to cool down to room
temperature.
When the device has cooled down suffi-
ciently, it can be switched on again.
10. Dismantling the de-
vice
Removing the blender jug
1. Rotate the blender jug
|
5
anticlockwise
slightly, and lift it off upwards.
2. Replace the cover
|
8
.
Removing the lid of the blender
jug
3. Rotate the lid
|
2
anticlockwise until you
can remove it.
4. Rotate the lid of the refill opening
|
1
anti-
clockwise and remove it.
Lifting up the drive arm
5. Turn the unlocking lever
|
10
to point up-
wards (in the direction of the arrow)
and lift up the drive arm
|
22
until it
clicks into place and the unlocking le-
ver
|
10
snaps back into its locked posi-
tion.
Removing the mixing tool
6. Press the mixing tool upwards slightly
and rotate it clockwise until it can be re-
moved from the axle
|
23
.
Removing the splash guard
7. Rotate the splash guard
|
21
anticlock-
wise until it can be removed.
Removing the mixing bowl
8. Rotate the mixing bowl
|
15
anticlock-
wise until it can be removed.
Lowering the drive arm
9. Rotate the unlocking lever
|
10
upwards
in the direction of the arrow.
10.Move the drive arm
|
22
all the way
down. The unlocking lever
|
10
jumps
back to the vertically locked position.
11. Cleaning and servic-
ing the device
DANGER! Risk of electric shock!
~
Disconnect the mains plug
|
13
from the
wall socket before each cleaning.
~
Never immerse the base unit
|
19
in wa-
ter.
DANGER! Risk of injury from
cutting!
~
Please remember that the blades
|
6
of
the blender jug
|
5
are very sharp. Never
touch the blades
|
6
with your bare
hands, to avoid cuts.
Summary of Contents for SKMP 1300 C2
Page 2: ...English 2 ƧnjnjLjǎNJNjƽ 20 Deutsch 38 ...
Page 21: ...19 GB ...
