GB
│
7
■
SKV 1200 A1
3) To use the lid
9
, place it on the part of the
housing which surrounds the attachment tool
socket
7
in such a way that the filling opening
is facing you . On the attachment tool socket
7
there is a locking device for the lid
9
:
ATTENTION! PROPERTY DAMAGE!
►
Never apply any pressure to the lid
9
when
attaching and removing it in order to ensure
that it is not damaged .
4) Depending on what you want to do, fit the
kneading hook
0
, whisk
q
or beater
w
into
the attachment tool socket
7
:
–
Insert the kneading hook
0
, whisk
q
or
beater
w
into the socket
7
so that the two
metal pins on the axle of the attachment
0
q
w
lock into the recesses of the attach-
ment tool socket
7
.
–
Press the attachment
0
q
w
as far as it
will go into the socket
7
and then turn it
anticlockwise as far as it will go (in the
direction of the arrow ) .
–
Let go of the attachment
0
q
w
. This is now
firmly held in the attachment tool socket
7
.
5) Add the ingredients into the mixing bowl
6
,
observing the following table with the recom-
mended filling quantities:
Filling quantities for . . .
min .
max .
Yeast dough
N/A
1000 g
flour
Cake mixture
N/A
900 g
plain
flour
Heavy dough
(e .g . shortcrust pastry)
N/A
900 g
plain
flour
Cream
200 ml 1500 ml
Egg white
(eggs of weight class M)
2
12
Adjust the remaining ingredients in the recipe
to the respective maximum quantity .
CAUTION! PROPERTY DAMAGE!
►
To prevent the appliance from being
overloaded, do not exceed the specified
maximum filling quantities .
If the appliance is labouring: switch off the
appliance, remove half of the dough and
knead each half separately .
NOTE
►
Please note that during the kneading or stirring
process, the dough in the mixing bowl
6
increases in volume or is pressed upward
slightly as a result of the movement . You
should therefore never fill the mixing bowl
6
right up to the top!
Warning! Danger of crushing! Make sure
that no parts of the body are located
under the swivel arm
1
when you push it
downwards .
6) Press down the release lever
2
and press the
swivel arm
1
with the attachment mounted
downwards into the working position until the
swivel arm
1
locks in place .
Summary of Contents for SKV 1200 A1
