GB
│
IE
│
NI
│
5
■
SKV 1200 B2
Preparations
1) Take all the parts out of the box and remove
the packaging material and any protective
wrapping or stickers .
2) Clean all components as described in the sec-
tion “Cleaning and care” . Ensure that all parts
are completely dry .
3) Place the appliance on a clean and level
surface and attach it firmly in place with the 5
suction cups .
4) Insert the power plug into the socket .
Speed settings
Level
Use
suitable for . . .
1 - 2
all
- Starting position for
all mixing and stirring
processes
- Adding ingredients
Kneading
hook
0
Beater
w
- Kneading and mixing
of firm dough or
firmer ingredients
2 - 4
Beater
w
- Mixing thick cake
mixture
- Mixing butter and
flour
- Mixing yeast dough
Kneading
hook
0
- Kneading yeast
dough
- Kneading thick cake
mixture
4 - 6
Beater
w
- Cake batter
- Whisking butter with
sugar
- Biscuit dough
6 - 8
Whisk
q
- Whipped cream
- Egg white
- Mayonnaise
- Whisking butter until
fluffy
P
Blender
t
- Mixing and chopping
soft or liquid ingre-
dients
- Crushing ice
Working with kneading hook,
whisk and beater
WARNING! RISK OF INJURY!
►
Never place your hands or fingers in the
mixing bowl
6
during operation! Danger
of injury due to rotating parts!
►
Do not change accessories unless the drive is
at a complete standstill! After being switched
off, the drive unit will continue to run for a
short time .
►
In cases of malfunction, switch the appliance
off and remove the plug from the wall socket
to prevent the appliance from being switched
back on unintentionally .
ATTENTION! PROPERTY DAMAGE!
►
When working with the kneading hook
0
,
whisk
q
or beater
w
we recommend al-
lowing the appliance to cool down after
10 minutes of operation .
NOTE
►
When you work with the kneading hook
0
,
whisk
q
or beater
w
, you should use the
lid
9
of the appliance to prevent the unwanted
leaking of ingredients .
Please proceed as follows to prepare the appli-
ance for operation with the kneading hook
0
,
whisk
q
or beater
w
:
1) Press down the release lever
2
. The swivel
arm
1
moves upwards automatically . If neces-
sary, move the swivel arm
1
to the highest
position .
2) Insert the mixing bowl
6
in such a way that the
locking tabs on the mixing bowl
6
grip into the
recesses in the base
5
. To do this, one of the
handles must be pointing in the direction of the
rotary switch
3
. Turn the mixing bowl
6
clock-
wise so that it is locked and firmly held in place .
