SilverCrest SMZC 500 A1
12 - English
8.
Hold the glass bowl (7) in one hand and the lid (3) in the other and twist them gently against one
another to check they are fitted firmly and properly.
9.
Place the motor unit (2) on to the lid (3). Hold the motor unit (2) in one hand and the lid (3) in the
other and twist them gently against one another. The motor unit (2) should rest in the two curved
recesses in the lid (3) and it should no longer be possible to twist it. It sinks down slightly when
properly fitted.
Warning!
Make sure the power cable (4) is not in your working area. Otherwise, you could accidentally
pull on it and tip over the Mini Chopper or cause the motor unit (2) to fall off the glass
bowl (7).
Switching on / selecting speed
The Mini Chopper can only be switched on once the motor unit (2) is properly locked into
position on the lid (3).
Warning!
Hold the motor unit (2) firmly in place with one hand and the glass bowl (7) with the other
when using the device to ensure the contents are not thrown out.
1.
Connect the power cable (4) to a live mains socket.
2.
Hold the motor unit (2) firmly and use your thumb to press the I or II button for the speed (1) you
want. See the recommendations on page 13.
Warning!
Note the short-time duty (KB time) for the cutting blades (5) and the emulsifying disc (6)
.
See
the technical specifications on page 5.
Summary of Contents for SMZC 500 A1
Page 1: ......
Page 2: ......
Page 3: ...English 2 Magyar 19 Slovenščina 37 Čeština 55 Slovensky 73 Deutsch 91 V 1 2 ...
Page 56: ...SilverCrest SMZC 500 A1 54 Slovenščina ...
