12 GB/IE/NI
¾
Select a brush head:
Domed brush head
11
Suitable for:
Cleaning uneven
surfaces
Use example:
Sinks and fittings
Flat brush head
12
Suitable for:
Cleaning large, even
surfaces
Use example:
Floors and walls
Conical brush head
13
Suitable for:
Cleaning spots that are
difficult to access
Use example:
Corners and joints
¾
Turn the brush head until it fits on the brush
axle 4 and push it .
¾
Remove the brush head: Pull the brush head
from the brush axle 4 .
Operation
m
ATTENTION!
Do not use abrasive cleaning
agents . They could irreparably damage the
surface you are cleaning .
¾
Hold the product close to the surface .
¾
Switching on: Press 6 .
¾
Guide the brush head 11 / 12 / 13 over the
surface in circular motions, applying gentle
pressure .
¾
Switching off: Press 6 .
Changing the angle
(see fig . E)
¾
Bend:
Press and hold 5 . Turn the upper
part of the product in a clockwise direction
until 5 locks into place .
¾
Straighten:
Press and hold 5 . Turn the
upper part of the product in an anti-clockwise
direction until 5 locks into place .
Cleaning and care
m
WARNING! Risk of injury!
Switch off
the product and disconnect it from the power
supply before cleaning .
m
WARNING! Risk of electric shock!
Do not immerse the product’s electrical
components in water or other liquids . Never
hold the product under running water .
m
ATTENTION!
Always keep the lid 8 closed
when the product is not charging .
¾
Clean product with a damp cloth . For
stubborn dirt, add a little mild detergent to the
cloth .
¾
The brush heads 11 / 12 / 13 can be
cleaned in water with a mild detergent .
¾
Allow all components to dry before reusing or
storing them .
Storage
¾
Store the product in the original packaging
when it is not in use .
¾
Store the product at a dry location out of the
reach of children .
¾
The rechargeable battery in the product
should be charged for at least 90 minutes
every 3 months .
