GB
│
IE
│
39
■
SSJ 150 A2
The appliance cannot be switched back on until you reset the safety cut-out.
Proceed as follows to be able to use the appliance again:
–
Set the on/off switch
to the “O” position and pull the plug on the
power cable
out of the socket. Allow the appliance to cool down
for 10–15 minutes.
–
Turn the housing lid
anticlockwise until the
marking points towards
the marking on the sieve tray holder
and clicks firmly into place.
–
Remove the housing lid
.
–
Remove the fruit or vegetable pieces causing the blockage.
–
Carefully remove the sieve tray
and turn the appliance base
over.
–
Press the “reset” button on the underside of the appliance base
:
–
Reassemble the appliance and resume juice extraction.
Assembling and operating the appliance
■
Before using the appliance for the first time, clean all component parts
thoroughly as described in the section “Cleaning and care”.
■
Install the appliance in accordance with the safety instructions.
WARNING! RISK OF INJURY!
►
Ensure that the plug on the power cable
is not in the socket before as-
sembling the appliance.
Summary of Contents for SSJ 150 A2
Page 3: ...A ...
