78 GB
NOTE:
this cooling process takes a few min-
utes. If you want to quickly prepare another
espresso, you can speed up the cooling pro-
cess by drawing hot water from the device:
1. While the LED rings
17
,
18
are flash-
ing rhythmically, turn the dial
4
in the
direction of the symbol
.
- The LED ring
17
flashes.
- First steam escapes, then water, then
the process stops.
2. When the LED rings
17
,
18
are again
flashing rhythmically, turn the dial
4
back to
OFF
.
The LED rings
17
,
18
are permanently lit.
The device is ready to prepare espresso.
14. Settings
You can adjust various settings on your es-
presso machine. For most settings, you must
first select the menu.
14.1 Selecting the menu
Requirement: the device is ready to be used.
The LED rings
17
,
18
are permanently lit.
•
Press and hold the button
19
for
approx. 5 seconds until the 3 LED
rings
17
,
18
,
19
flash twice in succes-
sion. You can now configure the set-
tings as described in the following
sections.
NOTE:
after approx. 25 seconds without
activity, the process is aborted without sav-
ing.
14.2 Water hardness
Like any hot water appliance, this espresso
machine must be descaled regularly. Lime
deposits form inside the device and on small
openings (e.g. on the steam nozzle
10
).
This impairs the functionality and damages
the device in the long run.
This machine automatically determines
when it is time to descale. When this time is
reached, all LED rings
17
,
18
,
19
are per-
manently lit. You will not be able to continue
working with the device. It needs to be des-
caled first.
To ensure that this happens at the right time,
you can adjust the water hardness setting to
match your tap water. You can get informa-
tion about your tap water from your water
supplier (e.g. on their website). If you use fil-
tered water, you can adjust the water hard-
ness accordingly. Please follow the
instructions of your water filter manufacturer.
You can choose between three hardness
ranges: soft, medium, hard.
The default setting on delivery is hard.
All information on descaling can be found in
chapter “Descaling” on page 82.
Requirement: the menu is selected. The
3
LED rings
17
,
18
,
19
flash twice in turn,
one after the other.
1. Press the button
18
.
The LED rings
17
,
18
,
19
briefly indicate
the current hardness range once:
Hardness
range:
soft
medium
hard
X
X
X
—
X
X
—
—
X
Summary of Contents for SSMS 1350 B2
Page 2: ...Español 2 Italiano 32 English 62 Deutsch 90 ...
Page 91: ...89 GB ...
