12 GB/IE/NI
Before first use
Remove the packaging . Check if all parts are
complete .
During production, some parts are covered
with a thin oil film for their protection .
Before first use, operate the product without
any food so that any potential residues
evaporate .
Clean the product and its accessories (see
the “Cleaning and care” section) .
NOTES:
The first few times the product is heated up, a
faint odour may be present . Ensure sufficient
ventilation in the area .
Discard the first set of waffles .
Assembly
m
WARNING! Risk of electric shock.
Before installing/removing the plates
[
11]
,
[
12]
,
[
13]
:
Disconnect the power plug
[
4]
from the wall
outlet .
DANGER! Risk of burns.
Do not
change/remove the plates
[
11]
,
[
12]
,
[
13]
right
after operation . Let the product cool first .
Installing the plates
Open the lock
[
1]
. Open the product .
Place the inner catch
[
10]
of the chosen plate
into the large hook catches
[
7]
.
Push down the plate until it clicks in place .
Repeat on the other side of the product .
NOTE:
Install only plates of the same type .
Removing the plates
Open the lock
[
1]
. Open the product .
Pull the release levers
[
8]
. Remove the plate .
Repeat on the other side of the product .
Operation
Preparation:
Grease the upper and
lower exchangeable plates
[
11]
,
[
12]
,
[
13]
with
suitable cooking oil .
Turning the product on: Connect the power
plug
[
4]
to a suitable wall outlet . The red
indicator
[
2]
lights up .
Turning the product off: Disconnect the
power plug from the wall outlet . The red
indicator
[
2]
goes off .
Keep the product locked while preheating .
Preheat until the green indicator
[
3]
lights up .
Light indicator
Status
Red indicator
[
2]
on
Product on
Red indicator
[
2]
off
Product off
Green indicator
[
3]
off Product is preheating/
reheating .
Green indicator
[
3]
on The baking
temperature has been
reached .