GB
│
MT
│
51
■
SSSES 1.5 B2
Cleaning and maintenance
CAUTION! MATERIAL DAMAGE
►
Do not use caustic, abrasive or solvent-based cleaning
materials. They can damage the surfaces of the appliance.
♦
Switch off the appliance by pressing the On/Off button
3
for approx. 5 seconds. The red LED
2
lights up for approx.
3 seconds.
♦
Wipe the appliance with a damp cloth. If required, use a mild
washing-up liquid on the cloth.
♦
If the sensor
6
is dirty, clean it carefully with a damp cloth.
♦
If you do not intend to use the appliance for a longer period
of time, clean the soap tank
8
in the following manner:
1. Remove the soap tank
8
from the main appliance
7
.
2. Wash out the soap tank
8
with clean water to dispose
the remains of the soap inside.
3. Reattach the soap tank
8
, which has been filled with a
small amount of clean water, to the main appliance
7
and switch on the appliance.
4. Activate the soap dispenser
5
a few times, so that both
the soap dispenser
5
and the connecting tubes inside
the main appliance
7
are rinsed out.
5. Remove the soap tank
8
from the main appliance
7
.
Empty the soap tank completely and leave to stand for a
short while with the soap tank latch
9
remaining open
to allow it to dry out in the open air.
Storage
CAUTION! MATERIAL DAMAGE
►
Do not turn the appliance upside down when drying! If you
do, water may enter the appliance and damage it!
♦
Switch off the appliance by pressing the On/Off button
3
for approx. 5 seconds. The red LED
2
lights up for
approx. 3 seconds.
♦
Always clean the appliance thoroughly before storing.
♦
Remove the batteries from the main appliance
7
.
♦
Store the appliance in a clean, dry location away from direct
sunlight.
IB_353244_SSSES1.5B2_LB5.indb 51
12.01.2021 14:40:59
Summary of Contents for SSSES 1.5 B2
