13
SUR 46 C2
GB
♦
After selecting a suitable time for the level of soiling, start the cleaning
process by pressing the ON button
2
.
■
During the cleaning procedure, you will hear a chirping sound.
■
The operating LED
5
lights up during the cleaning process.
■
The time counts down to zero on the display
and then the appliance switches
off automatically.
♦
To check the progress, even during the cleaning process, the cleaning
process can be paused by pressing the OFF button
4
.
♦
Press the ON button
2
to resume the process.
♦
After the cleaning process finishes, disconnect the appliance from the
power, open the lid
6
and carefully remove the respective item from the
stainless steel bath
7
.
♦
Rinse the cleaned parts thoroughly with clean water before drying them
with a soft and dry cloth.
NOTE
►
Most dirt particles detach or loosen after the first cleaning. If there is still
dirt residue after the cleaning, take a soft cloth and remove it by wiping
gently. If you have still not removed all of the dirt particles, repeat the
cleaning process once the appliance has cooled down.
DANGER
►
Always disconnect the appliance from the socket after use and before
pouring out the cleaning fluid.
♦
To pour out the cleaning fluid, hold the appliance over a sink, flip up the lid
6
and tip out the water via the front opening.
Summary of Contents for SUR 46 C2
