SUR 48 C4
GB
│
IE
│
31
■
Switching the appliance on and off
Start the cleaning process
♦
Insert the power plug into a mains wall socket.
♦
180 (seconds) appears onto the display
.
♦
Press the SET button
3
repeatedly until the desired cleaning time (090,
180, 280, 380 or 480 seconds, depending on the degree of soiling)
appears on the display
.
NOTE
►
090 seconds: Recommended for light soiling and items such as spectacles.
►
180 seconds: Standard time for normal soiling.
►
280 seconds: Recommended for the first cleaning with the ultrasonic
cleaner.
►
380 seconds: Recommended for the initial cleaning when several items
are being cleaned.
►
480 seconds: Recommended for heavy soiling.
♦
After selecting a suitable time for the level of soiling, start the cleaning
process by pressing the ON button
2
.
■
During the cleaning procedure, you will hear a chirping sound.
■
The operating LED
5
lights up during the cleaning process.
■
The time counts down to zero on the display
and then the appliance switches
off automatically.
♦
To check the progress, even during the cleaning process, the cleaning
process can be paused by pressing the OFF button
4
.
♦
Press the ON button
2
to resume the process.
♦
After the cleaning process finishes, disconnect the appliance from the
power, open the lid
6
and carefully remove the respective item from the
stainless steel bath
7
.
♦
Rinse the cleaned parts thoroughly with clean water before drying them
with a soft and dry cloth.
NOTE
►
Most dirt particles detach or loosen after the first cleaning. If there is still
dirt residue after the cleaning, take a soft cloth and remove it by wiping
gently. If you have still not removed all of the dirt particles, repeat the
cleaning process once the appliance has cooled down.
Summary of Contents for SUR 48 C4
Page 3: ......
Page 113: ...SUR 48 C4 110 ES ...