13
GB/IE/NI
Boiling water
Press the lid opening button
[
3]
to open the
lid
[
2]
. Fill the water kettle
[
12]
with water .
Place the water kettle
[
12]
onto the base
[
9]
.
Push the
I/O
switch
[
5]
into the
I
position .
The LED ring
[
10]
(on the bottom of the water
kettle
[
12]
) lights up . The colour of the LED ring
changes with the water temperature .
Colour
Temperature (approx.)
Green
≤ 50 °C
Blue
51–70 °C
Purple
71–80 °C
Yellow
81–90 °C
Red
> 91 °C
The product automatically turns off when the
water is boiled .
Cleaning and care
m
WARNING!
The product shall not be
immersed in water or other liquids . Do not
hold the product under running water .
Always disconnect the product from the power
supply before cleaning .
Check the product prior to each use for visible
signs of damage .
Cleaning
Do not use any abrasive, aggressive cleaners
or hard brushes to clean the product .
Clean the product with a slightly damp cloth .
Use a mild detergent, if necessary .
Rub all parts dry with a clean cloth .
Care
Cleaning the strainer
[
1]
Rinse the strainer
[
1]
with fresh water .
Removing calcifications
Limescale reduces the efficiency of the product
and increases energy consumption . Check the
product regularly for limescale deposits .
Fill the water kettle
[
12]
with a vinegar solution
(5 to 15 %) .
Push the
I/O
switch
[
5]
into the
I
position .
Wait for the product to turn off automatically .
Let the solution remain in the water kettle
[
12]
overnight . Discard the solution on the next
day .
Fill the water kettle
[
12]
with clear water up to
the
MAX
mark on the water gauge . Boil the
water .
After boiling, discard the water to remove any
remaining scale and vinegar .
Rinse the water kettle’s
[
12]
interior thoroughly
with tap water .
Storage
Store the product when it is not in use in its
original packaging .
Store the product at a dry location out of the
reach of children .
