background image

Warranty

The obligation of SilverLeaf Electronics, Inc. under this warranty shall 

be limited to repair or replacement (at our option) during the warranty pe-

riod of any part which proves defective in material or workmanship under 

normal installation, use, and service, provided the product is returned to 

SilverLeaf Electronics, Inc..  The warranty period shall be one year from 

date of purchase of the VMS™, or purchase of the finished coach with the 

VMS™ installed.

This warranty shall be invalid if the product is damaged as a result of 

defacement, misuse, abuse, neglect, accident, destruction, alteration, im-

proper electrical voltages or currents, repair or  maintenance by any party 

other than SilverLeaf Electronics Inc.  or an authorized service facility, or 

any use violative of instructions furnished by us.

This one-year warranty is in lieu of all other expressed warranties, 

obligations, or liabilities.  Any implied warranties, obligations, or liabilities, 

including but not limited to the implied warranties of merchantability and 

fitness for a particular purpose, shall be limited in duration to the one-year 

duration of this written limited warranty.

In no event shall SilverLeaf Electronics, Inc. be liable for any special, 

incidental, or consequential damages for breach of this or any other war-

ranty, expressed or implied, whatsoever.  This warranty gives you specific 

legal rights, and you may also have other rights which vary from state to 

state.

SilverLeaf Electronics, Inc.

2490 Ferry St SW  •  Albany, OR  97322  •  (888) 741-0259

www.silverleafelectronics.com

Summary of Contents for VMS 645 CL

















Reviews: