INTRODUCTION
This manual is an integral part of the tool and should be kept
with it at all times. If the product is resold this manual should be
included in the sale.
Safety Messages:
A safety message is to alert you to potential dangers that could
hurt you or others. Each safety message is preceded by one of
three words DANGER, WARNING or CAUTION.
These Words Mean:
DANGER: YOU WILL BE KILLED OR SERIOUSLY INJURED IF
YOU FAIL TO FOLLOW THE INSTRUCTIONS.
WARNING: YOU CAN BE KILLED OR SERIOUSLY INJURED IF
YOU FAIL TO FOLLOW THE INSTRUCTIONS.
CAUTION: YOU CAN BE SERIOUSLY INJURED IF YOU FAIL
TO FOLLOW INSTRUCTIONS.
Each safety message tells you what the hazard is, what can
happen and what you can do to avoid and reduce injury.
There are other important messages preceded with the word
NOTICE.
NOTICE: MEANS YOUR TOOL OR OTHER PROPERTY
COULD BE DAMAGED IF YOU FAIL TO FOLLOW
INSTRUCTIONS.
The purpose of these messages is to help prevent damage to
you, your tool, other property and the environment.
GENERAL SAFETY INSTRUCTIONS
Even when used as prescribed it is not possible to eliminate all
residual risk factors. Use with caution.
Keep guards in position
• Always keep guards in position, in good working order, correctly
adjusted and aligned. Never attempt to use a tool without
any guards supplied with it.
Remove adjusting keys
• Always check to see that keys, adjusting wrenches and
screwdrivers have been removed from the tool prior to
use.
Clean work area
• Accidents occur where work areas are cluttered or dirty. Keep
work areas clear of any un-necessary obstructions at all times.
Avoid working in areas where the floor may be slippery.
Dangerous environment
• Do not use tools in damp or wet conditions, or expose
them to rain. Provide adequate surrounding work space for tools
where there is a risk of explosion or fire from combustible
material, flammable liquids, flammable gasses or dust of an
explosive nature.
Children & pets
• Children and pets should be kept at a safe distance from the
work area AT ALL TIMES. Make sure the workshop is child
proof; lock all tools away where children can’t get access to
them. Remove batteries from all cordless tools.
Use the correct tool
• Do not force or attempt to use a tool for any other
purpose than its intended use.
Wear correct clothing and footwear
• Do not wear loose, highly flammable clothing, neckties, jewellery
or other items which may get caught in moving parts. Wear non-
slip footwear, cover or tie back long hair. Use safety footwear if
necessary.
Protect your head
• Wear safety goggles at all times, every day glasses are not
designed to offer any protection when using this product.
Normal lenses are not impact resistant and could shatter. Use
an approved face or dust mask when operation creates dust.
Hearing protection must be used at all times as the tool noise
level exceeds 80dB (A). Use a hard hat where there is a risk
of falling objects or a possibility of striking you head on level
obstructions.
Protect your self from vibration
• Many hand held power tools create vibration. Vibration can
cause disease. Wearing gloves will help maintain good blood
circulation in the fingers.
Safe working practice
• Always keep both hands on the power tool when using it. Never
over reach. Keep a proper footing at all times to ensure correct
balance.
Accessories
• The use of any accessories other than those mentioned in this
instruction manual is strictly prohibited. The attempt to use other
accessories other than those already supplied with this tool
could be dangerous and will invalidate your warranty.
Never stand on your power tool
• Standing on your tool could cause serious injury if the
tool is accidentally tipped or if the cutting tool is accidentally
contacted. Do not store materials above or near to the tool so
that it is necessary to stand on the tool to reach them.
Switch off before connecting
• Ensure the engine is stopped before connecting any of
the accessories to the main body. If the power tool stops
unexpectedly make sure the engine is not running before
attempting to check the tool.
Check for damaged or missing parts
• Before each use check if any part of the power tool is damaged
or missing, check carefully that it will operate properly and
perform its intended function. Check the alignment of moving
parts for binding. Any guard or other part that is damaged
should be immediately repaired or replaced. Check any other
condition that may affect the safety of the tool. DO NOT USE IF
THE TOOL IS FOUND TO BE DEFECTIVE.
Direction of feed
• Feed work into the blade or cutter against the direction of
rotation of the blade or cutter only.
Running the engine:
• When the tool is new, run the engine at a moderate RPM
• Do not maintain high engine speed until the engine is run in.
• The engine will not be capable of developing maximum power
until the end of the running in period.
• When first using the tool, stop and make sure that all
nuts and screws are securely fastened and tighten them
as necessary.
Servicing:
• It is recommended that you get your tool serviced shortly after
its first use.
• From thereafter, service the product regularly.
• Do not attempt to alter any of the components of this tool. To do
so would not only INVALIDATE YOUR GUARANTEE BUT MAY
ALSO RESULT IN INJURY TO YOURSELF, OTHERS
AROUND YOU OR THE UNIT.
STORAGE
• When you finish working, clean the tool completely,
making sure there is no grass or dirt wrapped in the
cutting tools.
• Be aware not to hit or cut the fuel tank while you put it onto
the ground.
• Do not let the tool fall or it may be damaged.
• Store the tool away from direct sunlight.
• Do not store in a nylon bag as this can encourage the formation
of mould.
Whenever the machine is not in use for an extended period
of time, proceed as follows:
• Empty the fuel tank completely.
• Protect all metal engine parts from corrosion by coating them
with oil.
• Remove the spark plug, put a few drops of oil into the cylinder
and then pull the recoil starter 2 to 3 times in order to distribute
the oil evenly. Replace the spark plug.
Never leave the tool running unattended
• Always wait until the power tool has come to a complete stop
before leaving it.
WARNING: THIS MACHINE CAN CAUSE DEATH OR SERIOUS
INJURY. FOLLOW THE INSTRUCTIONS IN THIS BOOKLET AT
ALL TIMES.
CAUTION: ALWAYS WEAR THE CORRECT PERSONAL
PROTECTIVE EQUIPMENT FOR THIS PRODUCT. MAKE SURE
BEFORE USE THAT ALL PROTECTIVE EQUIPMENT IS IN A
GOOD WORKING ORDER AND FREE OF ANY DEFECTS.
PRIOR TO USE
THIS PRODUCT PRODUCES POISONOUS
EXHAUST FUMES AS SOON AS
THE ENGINE IS RUNNING. THESE
GASES MAY BE COLOURLESS AND
ODOURLESS. TO REDUCE THE RISK
OF SERIOUS OR FATAL INJURY,
NEVER RUN THE MACHINE INDOORS,
OR IN POORLY VENTILATED AREAS.
ENSURE PROPER VENTILATION WHEN
WORKING IN TRENCHES OR OTHER
CONFINED AREAS.
