GB
4
No load speed: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10,000min
-1
Drive type: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3/8” square drive
Max . torque: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .102Nm (75ft lb)
Minimum hose diameter: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Ø
8mm
Maximum operating pressure: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .90psi
Air consumption (CFM): . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3cfm
Inlet connection: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ¼” BSP
Oil specification: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Generic air tool oil
Weight: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0 .93kg
As part of our ongoing product development, specifications of
Silverline products may alter without notice .
Sound and vibration information:
Sound Pressure L
PA
: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .94dB(A)
Sound Power L
WA
: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105dB(A)
Uncertainty K: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3dB
Weighted vibration ah(main handle): . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 .8m/s
2
Uncertainty K: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 .5m/s
2
The sound intensity level for the operator may exceed 85dB(A)
and sound protection measures are necessary .
Technical Abbreviations Key
Specification
WARNING:
Always wear ear protection where the sound level exceeds 85dB(A) and limit the time
of exposure if necessary . If sound levels are uncomfortable, even with ear protection, stop using the
tool immediately and check the ear protection is correctly fitted and provides the correct level of
sound attenuation for the level of sound produced by your tool .
WARNING:
User exposure to tool vibration can result in loss of sense of touch, numbness, tingling
and reduced ability to grip . Long term exposure can lead to a chronic condition . If necessary, limit
the length of time exposed to vibration and use anti-vibration gloves . Do not operate the tool with
hands below a normal comfortable temperature, as vibration will have a greater effect . Use the
figures provided in the specification relating to vibration to calculate the duration and frequency
of operating the tool .
Sound and vibration levels in the specification are determined according to ISO 15744 or similar
international standards. The figures represent normal use for the tool in normal working conditions.
A poorly maintained, incorrectly assembled, or misused tool, may produce increased levels of noise
and vibration .
www.osha.europa.eu
provides information on sound and vibration levels in the
workplace that may be useful to domestic users who use tools for long periods of time .
Description of Symbols
The rating plate on your tool may show symbols . These represent important information about the
product or instructions on its use .
Wear hearing protection .
Wear eye protection .
Wear breathing protection .
Wear head protection .
Wear hand protection .
Read instruction manual .
DO NOT use with compressed gas cylinders!
Environmental Protection
Air tools should not be disposed of with household waste . They contain traces of
oil and other lubricants . Please recycle where facilities exist . Check with your local
authority or retailer for recycling advice .
Conforms to relevant legislation and safety standards .
Caution!
n0
No load speed
n
Rated speed
Nm
Newton metres (torque)
psi
Pounds per square inch
cfm
Cubic feet per minute
°
Degrees
Ø
Diameter
W, kW
Watt, kilowatt
/min or min
-1
Operations per minute
rpm
Revolutions per minute
BSP
British Standard Pipe (thread)
dB(A)
Decibel sound level (A weighted)
m/s
2
Metres per second squared (vibration
magnitude)
Introduction
Thank you for purchasing this Silverline tool . This manual contains information necessary
for safe and effective operation of this product . This product has unique features and, even if
you are familiar with similar products, it is necessary to read this manual carefully to ensure
you fully understand the instructions . Ensure all users of the tool read and fully understand
this manual .
Original Instructions
797138 MANUAL.indd 4
19/06/2017 16:04
