www.silverlinetools.com
7
10.8V Impact Driver
652640
Maintenance
WARNING:
Before carrying out any maintenance/cleaning of the Battery Charger (11),
ALWAYS disconnect from the mains power supply. Remove the battery before carrying out
any maintenance/cleaning of the impact driver.
Note
: Both the impact driver and the charger contain no user-serviceable parts. If the
device does not perform as outlined in this manual, return it to an authorised Silverline
service centre for repair.
General inspection
• Regularly check that all the fixing screws are tight
• Inspect the supply cord of the tool, prior to each use, for damage or wear. Repairs
should be carried out by an authorised Silverline service centre. This advice also applies
to extension cords used with this tool
Cleaning
• Keep your tool clean at all times. Dirt and dust will cause internal parts to wear quickly,
and shorten the machine’s service life. Clean the body of your machine with a soft
brush, or dry cloth. If available, use clean, dry, compressed air to blow through the
ventilation holes
• Clean the tool casing with a soft damp cloth using a mild detergent. Do not use alcohol,
petrol or strong cleaning agents
• Never use caustic agents to clean plastic parts
Lubrication
• Slightly lubricate all moving parts at regular intervals with a suitable spray lubricant
Storage
• Store this tool carefully in a secure, dry place out of the reach of children
Disposal
Always adhere to national regulations when disposing of power tools that are no longer
functional and are not viable for repair.
• Do not dispose of power tools, or other waste electrical and electronic equipment
(WEEE), with household waste
• Contact your local waste disposal authority for information on the correct way to
dispose of power tools
652640_Z1MANPRO1.indd 7
20/07/2016 09:02
