FP54 VFD Manual
Features
1. Contrary to past solutions, where proprietary hardware and software are required to display
system information outside the computer monitor, SilverStone's new VFD module utilizes widely
available software on the internet to deliver highly customizable system information display.
2. VFD (Vacuum Fluorescent Display) is a self-illuminating display that is superior to the
traditional LCD in brightness, viewing angle, and clarity. The color of the display can also be
changed easily by using different colored window panel in front of the VFD.
3. VFD has low power consumption and long life. Its reliability is great for continuous 24 hour
running of crucial system information.
4. SilverStone's VFD module uses parallel port connector, which supports the majority of
motherboards currently available on the market.
5. The FP54, with SilverStone's VFD module, has high quality aluminum casing and finish that
can be elegantly integrated into any type of system and applications.
Hardware Installation & Setup (Please turn off your computer before you begin)
1. Installation of the FP54 casing is the same as any other 5.25" optical drive sold on the market.
You can install the FP54 into an empty 5.25" drive bay in your case.
2. Connect the data cable (14 pin) to the back of FP54, make sure the cable's pin 1 (indicated by
an arrow) is aligned with FP54's pin 1 position. Then connect the other end of the data cable to
the back of your system's Parallel (printer) port and the 4 pin connector from the data cable to your
power supply.
3. Turn on your computer and enter the BIOS menu (please refer to your motherboard manual).
In the menu screen make sure to change the Parallel (LPT) port setting to
EPP
only.
