��
20
Note that an excessively high value may result in a ‘noisy’ picture
and the edges of objects may appear unnaturally clearly defined.
SHARPNESS MODE
This allows you to select the type of processing associated with
sharpness adjustment. In the case of a progressive or interlaced
video signal Video mode is advisable; with PC graphic signals use
Graphic mode .
FILTER
This allows you to select the mode in which the input signal is
processed. Selecting the most appropriate value for a given input
signal ensures the best horizontal and vertical definition and makes
the picture sharper.
CINEMA MODE
Use this option if the video signal source is a movie film (obtained
from a Teleciné device with 3:2 or 2:2 pull-down). In this case a
deinterlace algorithm optimized for this type of signal is applied.
Selecting AUTO mode causes the de-interlacer to analyse signal
characteristics and apply the correct deinterlace mode automatically.
Selecting the OFF option causes the de-interlacer to apply a Motion
compensated algorithm optimized for video camera signals..
VIDEO TYPE
Inserts a filter that improves stability of images from videorecorders
or DVD players. To toggle between Normal and VCR mode, press
the
key on the remote control or select the value on the On
Screen Display.
NOISE REDUCTION
This adjustment serves to select the noise reduction filter value.
When the option is selected in the menu the picture is divided into
two. On the left hand side the picture is not affected by the filter
while the filter is active on the right hand side; this makes it possible
to compare the changes resulting from noise filtration with a clean
unfiltered image. It is possible to deactivate the filter (NOT ACTIVE)
using the automatic (AUTO) setting or manually (MANUAL) selecting
the most suitable value for the picture with the VALUE adjustment.
In this latter case it is sufficient to position the cursor under the
values and make the required setting with the and keys on
the remote control. A specific function (SKIN TONES ADJUSTMENT)
can be used in conjunction with Noise Reduction in order to make
skin tones appear more natural. In fact, it is frequently the case that
the reduction of noise is accompanied by a slight degradation of the
picture in skin tone areas, while using this function makes it possible
to obtain optimum quality of the entire picture.
PURONERO
Dinamically increases preceived contrast according to pictures dis-
played. Puronero is a SIM2 proprietary features.
Table 3
�����
��
�
����
���
�
������
������������
�����
���
���
����
�������
����
�����������
������
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
����������
��������
��������
������
����
���������
��������������
������
���������������������
ideo Standard is NTSC
�����������
����������
���������������
���������������������
IMAGE
This menu features adjustments relating to picture position, aspect
ratio, magnification etc.
ASPECT
This adjustment allows you to change the dimensions and aspect
ratio (relationship between width and height) of the displayed im-
age. There are five preset aspects available and three personalised
aspects (with user-settable parameters). You can select a different
aspect for each source: the selected aspect ratio will be automatically
called the next time the relative source is called.
You can also select the required aspect ratio by repeatedly pressing
the
key, or by pressing
and a numerical key (1...8).
The following aspects are available.