8
ht5000HB - pro5dl
Place the projector on a stable surface or use the optional
ceiling bracket.
wARNiNg: when using the ceiling mount bracket, the safety
instructions provided with the bracket must be strictly ob-
served. if you use a bracket other than the one provided by
SiM2 Multimedia, make sure the projector is located at least
65 mm from the ceiling and that the bracket does not block
the air intake and outlet slots.
If the image slopes left or right, adjust the two feet on the bottom
to obtain a level position, lining up the base of the projected
image with the base of the projection screen (Fig. 2).
Fig.2
Placed the projector at the desired distance from the screen:
the size of the projected image depends upon the distance
between the lens and the screen and the zoom setting.
Use the motorized zoom (Fig. 3) widen or to narrow the pro-
jected image.
Use the motorized focus (Fig. 3) to obtain the best definition of
the projected image. If the focus is correct, from up close to
the screen you should be able to distinguish each single pixel
that makes up the projected image (Fig. 3).
ZOOM
ZOOM
ZOOM
ZOOM
F1
FOCUS
AUTO
ASPECT
VCR
HELP
ZOOM
F2
ZOOM
FOCUS
FOCUS
FOCUS
FOCUS
Fig.3
The image can be centred using the motorized lens control.
Movements can be either vertical or horizontal (Fig.3a).
Fig. 3a
4 iNSTALLATiON
