LCC color gamut, the CMS menu and the Color Temperature are dimmed.
With Live Color Calibration (LCC) you can change any of the color gamut
directly entering absolute values.
User:
this mode is dedicated for the user, where he is able to change the
whole relative values of the color gamut through the On Screen Display, in
the CMS menu.
Cinema:
the color gamut nearest to the DLP Cinema. As for the User
mode, the user could change the whole relative values of the color gamut
through the On Screen Display, in the CMS menu.
Note:
Any NERO4 is factory adjusted to reach the HDTV REC709 standard.
This calibration is stored in the Color Gamut “HDTV” and it was obtained
selecting the Display Mode “Natural”, Color Temperature “D65” and
Gamma “2.2”.
Color Management System (CMS)
This function allow to customize the Color Gamut by the user, when it is selected
the Color Gamut “User” or “Cinema”.
Press the
↵
to enter the menu and then use or to select item.
▴
▾
Select one of the colors (Red/Green/Blue/Cyan/Magenta/Yellow/White) to adjust
its x & y offset and brightness.
Color:
use
◂
or
▸
to select from Red, Green, Blue, Cyan, Magenta, Yellow
or White colors.
x Offset:
use or to adjust the x offset value of selected color.
◂
▸
y Offset:
use or to adjust the y offset value of selected color.
◂
▸
Brightness:
use
◂
or
▸
to adjust the brightness value of selected color
(not available for White).
Reset:
choose “YES” to apply the factory default settings for color adjust-
ments.
Exit:
to exit from the CMS settings.
NERO4
User Guide
31
