Sima ATA 450 Li-ion, User Manual

ENG

4

1. GENERAL INFORMATION

2. GENERAL DESCRIPTION

3. SECURITY INSTRUCTIONS

WARNING: Pease read and understand perfectly the present instruction before using the machine.

This manual provides you with the necessary instructions to start, use, maintain and in your case, repair of the pre-

sent machine.  All aspects as far as the safety and health of the users is concerned have been stated. Respecting all 

instructions and recommendations guarantees safety and low maintenance. As such, reading this manual carefully is 

compulsory for any person responsible for the use, maintenance or repair of this machine.

ATA 450 and 580, have been designed and manufactured to be used in work sites in tying re-bar and flat bars for cons

-

truction. The machine has an ergonomic design, which gives the operator the possibility to simplify the work getting a 

high efficiency operation.

•  The automatic rebar tying machines is a hand-help in tying bars quickly.

•  The machine has an ergonomic design, which gives the operator the possibility to simplify the work getting a high 

efficiency operation.

•  Low maintenance.

•  The machine consists of a main body, a spool of wire, battery charger and an extra battery.

•  The machine is driven by an electric motor powered by battery. This turns the reel and a small rotor that binds the 

wire.

• 

Incorporates the most advanced technology for power tools, which we are pleased to confirm that it has acquired 

a useful and easy to use machine.

To avoid serious injuries to persons or property, please read these safety instructions carefully and 

make sure you understand them.

Using the RE-BAR tier for other purposes or other applications than described in this manual can re-

sult in serious accidents. Please make sure that you follow all instructions in the manual.

Use appropriate protection gear.

Employer and operator must make sure that the operator 

uses proper eye protection when the tool is used. This 

protection must comply with current laws and norms.

Ear protection can be necessary.

On a lot of work sites, it can be necessary to wear ear 

protection, to avoid permanent damage to the ears. Em-

ployers and employees must make sure that proper ear 

protection can be found and is used on the

work site. 

No children near the RE-BAR tier.

Do not allow spectators, especially children, near the 

machine while working with it.

Do not use the RE-BAR tier near

flammable substances.

Never use the RE-BAR tier near any 

flammable substances or fumes. The fu

-

mes from these can be sucked into the 

engine and cause an explosion.

Do not use the RE-BAR tier in wet

or damp environments.

If the RE-BAR tier is used in direct rain 

or water, damp environments or similar, 

the risk of getting an electrical chock is 

increased. Do not leave the RE-BAR tier

where it can be exposed to this.