SUR-35 User Manual
Ch.
SUR-35 User Manual
Ch.
Page
11
Touch Screen Buttons
The touch screen buttons enable you to operate the SUR-
35 and external devices. Use these buttons to program codes
from existing remotes, control your devices and set up macro
command sequences. You will hear a beep when you press a
button. To activate or deactivate the beep, please see
Beep
Toggling
in Chapter 7. The SUR-35 will turn itself off after a
user specified time period. To change the time period, please
see
Power Down Time Period
also in Chapter 7.
Rubber Buttons
Rubber Buttons
Rubber Buttons
Rubber Buttons
Rubber Buttons
The buttons on the bottom part of the SUR-35 allow you to
operate devices as well as help program the SUR-35. There
are three rubber buttons that have special functions:
Page / Date Button:
Toggles between Page 1 and
Page 2 of the Touch Screen buttons. If held down, the unit will
also display the date and year in the upper right hand corner,
followed by the day and the time .
Power Button:
Can turn your devices on and off
but also during Touch Screen Layout will display all possible
LCD choices.
Backlight / Sleep Button:
Pressing it quickly will
turn on the backlight, while holding it down for three seconds
will enter the
SLEEP Menu
.
Hard/Soft Buttons
Hard/Soft Buttons
Hard/Soft Buttons
Hard/Soft Buttons
Hard/Soft Buttons
22222
Page
50
Using Sleep Mode
Using Sleep Mode
Using Sleep Mode
Using Sleep Mode
Using Sleep Mode
Sleep mode allows the SUR-35 to send a command or
start a Macro after a specified time delay. One example is you
could use sleep mode to shut off a TV after you have already
fallen asleep.
To use sleep mode:
1. Press and hold the BACKLIGHT
(SLEEP) key for three seconds.
2. Use the arrow keys to specify
the sleep timeout period in 10
minute increments.
(24 hours
maximum)
3. Press
OK
to confirm.
Select the Device
using the device
keys
4. Press the button you want the
SUR-35 to send after when the
sleep timer reaches zero.
Note
: This key should already have
a command or macro assigned to it.
A macro can have up to 60
commands.
5. Press
OK
when finished.
Note
: If you want to cancel the
Sleep function:
• Press and hold the
BACKLIGHT
(SLEEP)
key for three seconds.
• Press
Exit
to cancel.
Sleep mode
Sleep mode
Sleep mode
Sleep mode
Sleep mode
66666
&
&
&
&
&
1
