SUR-35 User Manual
Ch.
SUR-35 User Manual
Ch.
Page
16
Chapter 3 – Setting Up the SUR-35
Before the SUR-35 can be used to control a device, it
needs to be configured to display your existing remote control
buttons and also programmed to send the correct infrared
signals. This chapter guides you through the Touch Screen
layout and SUR-35 setup procedure.
To get started, you will first set the date and time. Then you
can proceed to create devices and program the SUR-35.
Setting Up
Setting Up
Setting Up
Setting Up
Setting Up
33333
Date and Clock
Date and Clock
Date and Clock
Date and Clock
Date and Clock
To use the
Date
selection in the
SETUP Menu
:
1. Press and hold the SETUP
button on the Touch Screen for 3
sec.
Press each number button (2, 4,
6, 8) until it disappears.
2. Use the arrow buttons on the
Touch Screen to select DATE
(displayed in the upper right
corner)
and then press the
OK
button.
Enter the year, month and date first.
3. Use the
LEFT
and
RIGHT
arrow
keys to move the curser and the
UP
and
DOWN
arrows to change the
selection.
Press OK when finished.
Now set the hour, and minutes.
4. Use the arrow keys as in Step 3.
5. Press
OK
when finished and then
EXIT
to leave the
SETUP
menu.
1
3
Page
45
4. Use the arrow keys to select
the time.
5. Press
OK
Note
: If you used
SPEC
(Specific
Day/Time) you will also have to set
the date.
6.
Select the key
that the timer will
press.
If you want, you can switch
devices (use device keys) or Touch
Screen pages. (Use the
button.)
At the selected time and date, the
SUR-35 will send the infrared code
or start the macro associated with
the key selected in step 6. When
finished press the
EXIT
key to leave
the
MACRO Menu
.
Macro Timers
Macro Timers
Macro Timers
Macro Timers
Macro Timers
66666
2
%
5
