Page 16
To create a custom name for an input:
1) Select the input you want to name by pressing the CHANNEL < > buttons.
2) Press and hold the D.NAME button for 3-4 seconds or until you hear a beep. The six
character spaces will begin to blink.
3) Press the D.NAME button again to enter the custom name mode. The first character space
on the left will begin to blink.
4) Use the CHANNEL buttons < > buttons to scroll through a list of letters, numbers and
special characters.
5) After selecting the desired character for that space, press the D.NAME button again to
move to the second character space. Repeat the process to select a character for that
space.
6) Repeat steps 3-6 until you have created a custom name for that input, as shown below.
7) To save the name for that input, press and hold the D. NAME button for 3-4 seconds or
until you hear a beep.
CVBS
CVBS
COMPONENT
0
dB
1
M Y
--
T V
--
INPUT
SIGNAL
HDMI
COMPONENT
S-VIDEO
S-VIDEO
HDMI > SPDIF
VOLUME
