Securing the screen and filling the water ballasts
Inflate the spare set of pontoons using the include pump.
The spare pontoons contain water ballasts to weight and secure the inflated screen.
Locate the clear plastic water intake cap. (Note: the air intake valve has a black threaded cap, the
water intake is clear plastic)
(FIG. 7
)
Carefully pour (suggest using a funnel) the water into the ballast. Standard tap water can be used.
(FIG 8)
Each ballast holds approximately 2 Gallons of water. ( Fill to 1 gallon recomended )
Make certain the cap is securely closed when finished.
The spare pontoons are easily attached to the screen frame pontoons using the provided straps
FIG. 7
FIG. 8
Page 10
