MOON by Simaudio
Unpacking
The
MOON 870A
should be removed from its box with care.
The following accessories should be included inside the box with your unit:
•
AC power cable
•
Warranty and product registration information (USA and Canada only)
Once the unit is unpacked, inspect it thoroughly and report any damage to your dealer immediately.
We suggest that you keep all of the original packaging, storing it in a safe, dry place in case you’re required
to transport this product. The customized packaging is specially designed to protect the unit from any
potential damage during transit.
Please write the serial number of your unit in the space provided below for future reference.
Installation & Placement
The MOON 870A Dual-Mono power amplifier is both powerful and heavy. It requires reasonable ventilation
to maintain an optimum and consistent operating temperature, especially since it will radiate heat when
driven hard. Consequently, it should be placed in a location with empty space around it for proper heat
dissipation. You should never place another component on top of this amplifier. As well, the amplifier should
be placed on a solid level surface. You should avoid placing it near a heat source or inside a closed cabinet
that is not well ventilated as this could compromise the amplifier’s performance and reliability. The 870A uses
two large toroidal transformers in its power supply; even though they are well shielded, you should not place
this amplifier too close to source components sensitive to EMI, such as turntables, phono preamplifiers and
CD Players.
If the surface you have chosen isn’t perfectly level, each of the four (4) cones of your 870A are height
adjustable; carefully using your fingers, you can either raise each leg by turning the cone underneath
clockwise, or lower each leg by turning it counterclockwise.
We strongly recommend that you leave these cones mounted to the component at all times for reasons related
to both performance and aesthetics.
Serial Number
