background image

MOON MC-8 Multi-Channel Power Amplifier

 

 

Specifications   

 

 

Configuration   .........................................................  From 2 to  7 channels   
Power Supply Transformers .....................................  3.0kVA 
Power Supply Capacitance  (base) ............................  216,000µF 
Power Supply Capacitance  (additional per channel)  ..  9,000µF 
Class Of Operation   .................................................  A/AB   
Input Impedance   ...................................................  24,900

Ω

 

Input Sensitivity   .....................................................  1420mV   
Output Device Type  ................................................  Bipolars - 8 per channel   
Power Output at 8

Ω

  / 4

Ω

 (any channel)   .................  250 Watts  /  500 Watts  

Frequency Response   ..............................................  10Hz - 0/-3dB   
Output Impedance   .................................................  0.01

Ω

 

Damping Factor (static)    .........................................  800   
Gain   ......................................................................  29dB   
Signal-to-noise Ratio   ..............................................  > 105dB @ full power  
Slew Rate   ..............................................................  80V/µs   
Maximum Current – Peak / Continuous .....................  40 amperes  /  20 amperes 
Crosstalk @ 1kHz   ...................................................  -90dB   
Intermodulation Distortion   ......................................  Unmeasureable   
THD  (20Hz - 20kHz) @ 1 watt  /  250 watts  ............  < 0.02 %  /  < 0.05 %   
Power Consumption @ idle   .....................................  85 Watts   
AC Power Requirements   .........................................  230V / 60Hz  or  240V / 50Hz   
Dimensions  (W x H x D, inches) ..............................  17.4  x  13.4  x  21 

 

Balanced Input Pin Assignment: 
 

Pin 1................................  Ground 

 Pin 

2................................  

Positive 

 Pin 

..............................  

Negative 

 

12 Volt Trigger:           

Logic ...............................  Direct   (0V off, 12V on) 

 

Connector........................  1/8” mini-jack 

 

Input Impedance..............  1k

Ω

 

 

Current Consumption........  12mA 

 

Net weight:   

Basic Unit   ......................  170 lbs. / 76 kgs. 

 

Each additional channel  ...  4 lbs. / 2 kgs.  

 Shipping 

Weight ..............  240 lbs. / 108 kgs. 

 

 

 

NOTE:     In the event that you require either the RS-232 codes for your MOON MC-8 or would like to  

  operate this amplifier in a bridged mono configuration, please contact Simaudio Ltd. directly  

 by either email (service@simaudio.com) or toll-free telephone (877-980-2400). 

 

 

 

 Fuse Replacement: 

Use a 10A Long Fast blow  (3AG size). 
 

 

____________________________________________________________________________________ 

 

Specifications  

  

 

 

                                                                     11 

Summary of Contents for MOON Evolution MC-8












Reviews: