background image

7

1

0

Display of the functioning faults on the display

Ignition failure

Turn  the  selector  CR/OFF/EST/INV/UNBLOCK  on  the boiler  control  panel  to  the  unblock  posi-
tion  (

) to restore functioning (fig. 3). If the failure should occur again, call the authorised tech-

nical staff for assistance.

Safety stat interception

Turn the selector CR/OFF/EST/INV/UNBLOCK of the boiler control panel to the unblock posi-
tion (

) to restore functioning (fig. 5). If the failure should occur again, call the authorised tech-

nical staff for assistance.

Air pressure switch failure

Call the authorised technical staff for assistance.

1 6

Default values

To  take  the  setting  to  the  default  values,  press  the

and 

keys  at  the

same time for at least 3 seconds. As confirmation a sign will appear on the display.

19

ATTENTION

The values of the following line numbers previously entered will be lost.

• Temperature and time programme 

to

• Vacation period

1

10

18

Vacation function

To enter the number of days of absence.

In the display the vacation symbol will be shown (

), on the left the day of activa-

tion (1 = Monday/7 = Sunday) and on the right the number of vacation days.

18

During the vacation the regulator will be on the availability mode.

When the set days have elapsed, the regulator will go on to the automatic function.

NOTE:

The vacation period may be cancelled by pressing a key of the operating mode.

Current values

Display and setting of the gradient of the heating characteristics curve. 
When the room temperature set is not reached choose the gradient 
indicated in point 2.10.3

Display of the current boiler temperature.

Display of the current power of the burner and of the current operating mode
(

= = heating/

= D.H.W. service)

15

16

17

Setting the time

To set the current day of the week
(1 = Monday/7 = Sunday)

To set the current hour

To set the current minute
Once the hour is completed, the setting of the hour changes.

12

13

14

With 

and 

keys the current hour is regulated. Pressing these keys together, the

regulation is speeded up in an increasing sense.

Summary of Contents for benchmark Planet Super 4 W. M.













Reviews: