IT
ES
PT
GB
105
2.9
LOGICA REMOTE CONTROL
All the boiler's functions can be managed
by a optional digital multifunctional device
code 8092204 for the remote of the boi-
ler itself and for regulating room climatic
conditions with an operational reserve of
12 hours.
The heating circuit is controlled by the room
temperature sensor built-in the equipment
or by the atmospheric conditions, with or
without environmental inflow, if the boiler is
connected to an external sensor.
Characteristics:
–Ergonomic control unit divided according
to function (control levels)).
–Clear division of basic functions:
•
operating regime, correction of set
value and presence button are directly
accessible;
•
Dif fer ent r eal curr ent values ar e
accessible through the "info" button;
•
other functions can be programmed
after the cover has been opened;
•
special service level with protected
access;
–Each setting or modification is displayed
and confirmed.
–Tome setting (special line for changing
BST/CET).
–Heating programme with max. 3 heating
periods per day, individually selectable.
– Copy function for easy transfer of hea-
ting programme to the next or pre-
vious day.
– Holiday programme: the programme is
interrupted for the holiday period and auto-
matically restarted on returning home.
–Option to return the heating program to
default values.
–Programming lock (child safety).
Functions:
–Delivery temperature control guided by
the atmospheric conditions, taking into
account the dynamics of the building.
–Delivery temperature control guided by
atmospheric conditions with influence of
ambient temperature.
–Ambient temperature control only.
–Adjustable influence of ambient tempera-
ture shift .
–Switch-on and switch-off optimisation.
–Rapid lowering.
–ECO functions (daily heating limiter, auto-
matic summer/winter switch-over).
–Controllable maximum delivery tempera-
ture limit (specifically for floor plants).
–Limitation of increase in pre-set delivery
temperature.
–Anti-freeze protection for buildings.
–Hourly programming of the tank unit
temperature on two levels: comfort and
reduced.
–Domestic hot water control with nominal
value requirement and enable.
–Connection to room sensor or switching
of operating regime through the telepho-
ne sys t em wit h ext ernal cont act or
through a window contact.
–Anti-bacterial.
2.9.1
Installation
The unit must be installed in the main living
room. For installation, follow the assembly
instructions inserted in the package.
At this point, with the selector knob on (
),
the installer can adjust the basic parame-
ters settings according to the individual
needs (point 2.8.2).
If there is a thermostatic radiator valve
fitted, this must be set to maximum.
2.9.2
Installation settings
The settings for the basic operating para-
meters for individual needs are reported in
the instruction leaflet supplied with the
"Logica Remote Control" and in the section
reserved for the user in this manual.
For further adjustments which can be car-
ried out by the installer, the "Logica Remote
Control" offers a level of service and para-
meterising which can only be accessed
through a special combination of buttons.
To activate this level of service or parame-
terising press buttons
and
least 5
seconds. This will activate the parameteri-
sing level. Then use the same arrow buttons
to select the individual input lines and adjust
the values with
or
.
Fig. 14/c
2.8.7
“30/130” wiring diagram with low temperature kit code 8100760
LEGEND
C
Zone control unit
R
Relay
P1
Zone 1 system pump
P2-P3 Low temperature zone pump
TA1
Zone 1 room thermostat
TA2
Low temperature zone room thermostat
TAB
Low temperature safety thermostat
Summary of Contents for DEWY 30/130
Page 33: ......
