www.simmonsdrums.net
33
The first name in electronic drums.
Advanced Operations
effects settings
The
sD1500
sound module has built-in Reverb and 4 Band EQ effects, which are adjustable
in the Utility Effects setup. The available parameters are available below.
Item
explain
Pararameters
Default
reverb
Master reverb switch
OFF/ON
rvbTyp
Reverb type
SRoom/MRoom/LRoom/Hall1/Hall2/
Plate/Delay/P.Dely
eQswitch
4 band eQ master switch
OFF/ON
According to current KIT
eQlow
eQ low band
-12DB~12db
eQl.mid
eQ low middle band
-12DB~12db
eQH.mid
eQ high middle band
-12DB~12db
eQHigh
eQ high band
-12DB~12db
To change the assignment for the Reverb:
1. Press the
[uTIlITY]
Button.
2. Press the
[PaGe -/+
] buttons to select EFFECT.
3. Press
[saVe/enTer]
. You will see the Reverb screen.
4. Press the
[PaGe +]
button.
5. Press the
[-/+]
buttons or VALUE DIAL to select the Reverb type.
To change the settings for the Master 4 Band eQ:
1. From the Reverb type screen press the
[PaGe +]
button. You come to the EQ Switch screen.
2. Press the
[PaGe -/+]
buttons to select the EQ parameters that you want to change.
NOTE:
If you want to save all the effects for the current kit, see the “Saving a Kit” section.
9993 Simmons SD1500 Drum Set Manual.indd 33
4/25/14 10:56 AM