User’s Manual
Digital Drum Kit
midi device
audio equipment
cd player
power supply jack
6
1.
Use a
MIDI
cable to connect the
MIDI OUT
jack on the drum
module to the
MIDI IN
jack on an external
MIDI
device.
2.
The module will output all the
MIDI
codes generated by pads
and pedal via the
MIDI
output connector. Metronome click
and song
MIDI
data are excluded.
1.
When using an amplifier, connect the Output
L/MONO
and
R
jacks on the rear panel to the input of the amplifier.
(For mono playback, use the
L/MONO
jack; for stereo
playback, connect both
L/MONO
and
R
jacks.)
2.
The volume is adjusted with the
VOLUME
knob.
1.
Connect the audio output of a CD player or other audio
source to the stereo
AUX IN
TRS jack on the rear panel.
2.
The signal can be mixed with the drum signal,
allowing you to play along.
headphones
An optional set of stereo headphones can be connected to the
PHONES
jack located on the side of the drum module.
Make sure the power is switched
OFF
.
Connect the power adapter to the
DC IN
jack on the rear panel.
Note:
1.
To protect speakers, amplifiers and drum module from
damage, rotate volume knob to minimum volume level
before switching power
ON
.
2.
Make sure the power is switched
OFF
when connecting
drum module with external devices.
