SDHB2 User’s Manual
Hybrid electronic add-on pack
Press the
[VOICE]
button until the LED display shows “Pxx”. (xx = Pan value: -8
~
+8)
Use the
[+]
and
[-]
buttons to adjust the pan of the current pad.
adjusting level
Press the
[VOICE]
button until the LED display shows “Lxx”. (xx = Level value: 0
~
32)
Use the
[+]
and
[-]
buttons to adjust the level of the current pad.
adjusting pan
adjusting tuning
Press the
[VOICE]
button until the LED display shows “txx”. (xx = Tuning value: -8
~
+8)
Use the
[+]
and
[-]
buttons to adjust the tuning of the current pad.
saving user kits
Make sure you save your customized kit; otherwise, your changes will be
lost when you select another kit or turn off the SDHB2.
Kits 001
~
020 are factory presets. Customized kits can be saved in
User kits 021
~
050.
User kits store all the Voice settings (Voice Number, level, pan and tuning)
for all the pads.
To save your customized kit to one of the User kits:
1. Press the
[SAVE]
button. The kit number flashes on the LED.
2. Use the
[+]
or
[-]
buttons to set the User kit number (021
~
050).
The kit number will still be flashing.
3. Press the
[SAVE]
button again. The kit number stops flashing
and the SDHB2 returns to Kit Mode.
Note:
To cancel the save operation while the LED is flashing, press the
[KIT]
or
[VOICE]
button.
12
