14
15
OWNER’S MANUAL
GETTING STARTED
SWITCHING THE POWER ON
1. Connect the AC Adapter to the drum module.
2. Press the power switch on the front panel to turn on the
module.
NOTE: There is an automatic power off function that can
turn off the module when the kit is not being used for a
certain period of time. The default setting is Always ON. You
can change this setting by holding down the [KIT] button for
two seconds. This will disable the auto power off function.
Press and hold the [KIT] button again to switch it back on.
BASIC OPERATION AND NAVIGATION
There are 3 main modes for the module KIT, SONG and
SETUP. To enter these modes press the corresponding
buttons on the top left panel of the module.
1. Select the parameter to be adjusted.
2. Adjust the value using [ - ] / [+] buttons.
TITAN 20 DRUM MODULE OPERATION
REAR PANEL
1. Trigger Input Jacks
The included multipin cable connects the pads and the
pedals to the module.
BACK PANEL
1. AC Adapter Input
Connection for the included 9V DC power adapter.
2. USB Port
Used for connecting the Titan 20 module to a computer.
3. AUX Input
Stereo
1/8
” jack to connect external audio devices to
module.
4 Output
¼” stereo audio outputs to connect to external audio
sources.
5. Headphones (on left side panel)
Connect a pair of stereo headphones to practice quietly.
6. Tablet Shelf
The included shelf supports a smartphone or tablet for
displaying videos or apps while you play along. The
shelf clicks in place on the back of the module, and
can be removed when not in use. The padded back
and bottom help to keep you device in place during a
performance.
1
1
2
3
4
5
6
