11
OWNER’S MANUAL
CONNECTIONS
CONNECTING THE SOUND MODULE AND PADS
Using the provided cables, connect the 1/4” jacks to the
corresponding drum pads, cymbal pads and kick pad. The
pin connection will attach to the serial port of the sound
module. (See illustration.) The cables have some extra
length so you can customize the kit, for example swapping
the crash and ride for left-handed players.
NOTE: Use the included cable clips to attach cables to
the back of the rack and the hook-and-loop ties to attach
cables to the vertical sections of the rack.
AC ADAPTER
The Titan 50 module uses an external power supply called
an AC Adapter. This plugs into the back of the module.
Make sure the power is switched OFF on the module and
connect the power adaptor with the DC IN jack on the rear
panel. For extra protection, there is a cable clip for the
power cable on the bottom of the module. Insert the power
cable through the C-shaped opening.
NOTE: To protect the speakers, amplifier and the drum
module from damage, lower the volume to the minimum
level before switching the power ON.
Make sure the power is switched OFF when connecting the
drum module to external devices.
