18
KIT MODE
SELECTING A KIT
1. Press the KIT button. The current Kit number and Kit
name are displayed.
2. Press the – /+ buttons to select the 25 Preset or 10 User
Kits.
USING THE METRONOME (CLICK)
The CLICK is the metronome sound that is played when you
are listening to play along with.
1. Press the CLICK button to switch the metronome on or
off.
2. Press the Tempo button to change the tempo using the
+ and – buttons.
3. To change the time signature of the metronome, press
SETUP until you see “TimeSig” and choose the desired
signature. The default is 4/4 and the other choices are:
1/4, 2/4, 3/4, 5/4, 6/4, 7/4, 3/8, 6/8. 7/8, 9/8, and 12/8.
4. When the click is active, you will see the display animate
the metronome back and forth to the tempo you set.
USING A DOUBLE-KICK PEDAL
The kick pad on the Titan 50 was designed to work with a
double kick pedal. When playing with a double-kick pedal,
you might want to play a closed high-hat sound, similar to
“opening the choke” on an acoustic hi-hat stand. Here’s
how you do this on the Titan 50:
1. Press SETUP
2. The first display should read “Hi-Hat:Pedal” This is
the default setting, the hi hat controller pedal controls
whether the hi hat is open or closed.
3. Press the + button to change this to “Hi-Hat: Mid.” This
is the equivalent to opening the choke on your hi-hat
stand so that the cymbals touch. This gives a trashier
sound for playing hard rock or metal styles.
4. Press the + button again to change this setting to
“Hi-Hat: Cl.” This is a dryer, closed sound equivalent to
tightening the choke on your hi-hat stand.
5. If you step on the pedal, even after exiting this menu,
the hi-hat control will revert to “Pedal” for normal
operation.
