22
simon.es/simon100
INSTALATION AND CONFIGURATION GUIDE
Simon | 100
ADD A DIMMER iO
In the case of adding a Simon Dimmer iO, you will
see that the application will automatically
recognize that it is a Dimmer.
By default, all adjustable electronic switches need
to be calibrated according to the type and power
of the associated light source.
For more information on the compatibility of light
sources see our website or write to
A legend in red will appear at the top of the screen
indicating that the device needs calibration. Click
on it and it will be calibrated automatically. This
must be done the first time and every time for
some reason we change the light source.
App Auto adjust action
Rocker Auto adjust Action
We can do it from the app by clicking on
"Calibrate" or from the physical mechanism
by holding down the Rocker for 10 seconds.
It should be noted that the calibration
procedure from the Rocker is valid for both
the iO connective Rocker (ref.10001020-
13X) and the non- F.10002020-13X).
As mentioned above, when adding the
DIMMER iO (but it is the case for everyone)
you will see that the application screen has
a "Rocker", an interactive zone that
simulates the touch surface of the physical
Rocker to be able to regulate the lights To
the desired intensity (or in memory). By
pressing on the icon the load can be
activated, just like the physical Rocker and
will change color when pressed.
The interaction will be similar to the physical Dimmer installed. It is a way of verifying that the device has been
recognized and that the load is switched on by pressing the physical Rocker or the virtual icon:
In the example we
changed the icon, we
assigned the room
"Dining room" and we
changed the name to
"Lights Sofá", for a
better
visual
identification
that
corresponds to the
real place.
Touch area
ON/OFF and dimming value
LEDs
Show the dimming value
