www.simondstore.com
Page
2
of
7
Description:
Propane Forge is inevitable product for a Blacksmith, Hobbyist, Jewellers & Knife makers. It is ideal for heating and
bending of metals, tempering and heat treatment of small knives & agricultural tools.
This Propane forge is made from SS-304 material and its heating zone is fully insulated with Refractory Ceramic Fiber,
which can resist temperature up to 2600°F (1425°C). A rigid block of Refractory Fire Brick placed at the bottom of the
forge to resist high velocity firing.
Specifications:
Forge Type
:
Single Burner Oval Forge
Shape
:
Oval
Burner
:
Single Burner
Inside Floor
:
1” Thick Refractory Fire Brick – 1 Nos
Forge Body Construction
:
16 Gauge (1.5mm) SS-304 Metal Sheet
Forge Internal Dimensions
:
4.4” (H) x 6.3” (W) x 10” (L)
Operating Temperature
:
2600°F (1425°C)
Inside Insulation Material
:
1” Thick Refractory Ceramic Fiber, 2600°F, 10 Pcf
Burner Material
:
SS-304
Regulator Operating Pressure Range :
0-21 PSI
Tank Connection
:
Standard BBQ Propane tank
List OF Parts
Name
Single Burner
OVAL
Forge
FORGE
Forge Body
PART-A, B & C
Single Burner Set (Burner & Air chock Valve, Gas Inlet Pipe With Valve)
PART-D
6.5’ (2 Meter) Gas Hose with Clamps
PART-E
Refractory Fire Brick
PART-F
Gas Pressure Regulator with Manometer
PART-G
Teflon Tape
Complementary Ceramic
Fiber Blanket
Filling Gap of burner & forge
Proper Use:
The gas forge must be used exclusively for making a gas fire for the heating of metals for the handcrafted forging and
must be used only for this purpose under following the safety instructions of this manual.
Any other use can’t be considered as its proper use.
Only propane gas can be used.
The manufacturer is not responsible for any damages caused by a non-proper use.
