3
WARNING:
Before using your
power tool, it is critical that you read
and understand these safety rules.
Failure to follow these rules could result
in serious injury to you or damage to
the power tool.
Good safety practices are a combination of
common sense, staying alert and
understanding how to use your power tool.
To avoid mistakes that could cause serious
injury, do not plug in your power tool until
you have read and understood all safety
rules.
READ
and become familiar with this entire
Owner’s Manual.
LEARN
the tool’s
applications, limitations and possible
hazards.
●
WARNING:
Look for this symbol that identifies
important safety precautions. It means
CAUTION! BE ALERT! YOUR
SAFETY IS INVOLVED!
●
KEEP GUARDS IN PLACE
and in
working order.
●
ALWAYS WEAR EYE PROTECTION
.
Any power tool can
throw foreign objects
into your eyes which
could cause
permanent eye damage. ALWAYS
wear safety goggles (not glasses) that
comply with ANSI safety standard
Z87.1. Everyday
glasses have only
impact resistant lenses. They ARE
NOT safety glasses. Safety goggles
are available at Canadian Tire Stores.
WARNING:
Glasses or
goggles not in compliance with
ANSI Z87.1 could cause serious
injury when they break.
WORK AREA
●
Keep your work area clean and well-
lit.
Cluttered benches and dark areas
invite accidents.
●
Do not operate power tools in
environments where explosive
elements, such as flammable
liquids, gas or dust are present.
Power tools create sparks which may
ignite the dust or fumes.
●
Keep bystanders, children and
visitors away while operating the
tool.
Distractions can cause you to
lose control.
SAVE THESE INSTRUCTIONS FOR REFERENCE
!
!
!
SPECIFICATIONS
POWER TOOL SAFETY
Mounting Plate Diameter ……………..
3 ½”
Motor
OPM …………………………….. 2,900
Battery Voltage ………………………... 12 V
Charger ………………………………… 3–4 Hour, Class 2
Charger Input ………………………….. 120 V AC, 60 Hz
Charger Output ………………………... 15 V DC, 500 mA
